Broan 103023 Instruction Manual download pdf

READ AND SAVE THESE INSTRUCTIONS

MODEL 103023

WOOD HOOD KIT

CAUTION

1. For general ventilating use only. Do not use to exhaust hazardous or

explosive materials and vapors.

2. To avoid motor bearing damage and noisy and/or unbalanced impellers,

keep drywall spray, construction dust, etc. off power unit.

3. For best capture of cooking impurities, your range hood should be

mounted so that the bottom of the hood is 18-24” above the cooking

surface.

4. Please read specification label on product for further information and

requirements.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO

PERSONS, OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer. If you have

questions, contact the manufacturer at the address or telephone number

listed in the warranty.

2. Before servicing or cleaning unit, switch power off at service panel and

lock the service disconnecting means to prevent power from being

switched on accidentally. When the service disconnecting means cannot

be locked, securely fasten a prominent warning device, such as a tag, to

the service panel.

3. Installation work and electrical wiring must be done by a qualified

person(s) in accordance with all applicable codes and standards, includ-

ing fire-rated construction codes and standards.

4. Sufficient air is needed for proper combustion and exhausting of gases

through the flue (chimney) of fuel burning equipment to prevent backdraft-

ing. Follow the heating equipment manufacturer’s guideline and safety

standards such as those published by the National Fire Protection As-

sociation (NFPA), and the American Society of Heating, Refrigeration and

Air Conditioning Engineers (ASHRAE), and the local code authorities.

5. When cutting or drilling into wall or ceiling, do not damage electrical wiring

and other hidden utilities.

6. Ducted fans must always be vented to the outdoors.

7. Do not use this unit with an additional speed control device.

8. To reduce the risk of fire, use only metal ductwork.

9. Use with approved cord-connection kit only.

10. This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1. Never leave surface units unattended at high settings. Boilovers cause

smoking and greasy spillovers that may ignite.

2. Always turn hood ON when cooking at high heat or when cooking flaming

foods.

3. Clean ventilating fans frequently. Grease should not be allowed to

accumulate on fan or filter.

4. Use proper pan size. Always use cookware appropriate for the size of

the surface element.

WARNING

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A

RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:*

1. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray,

then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the

flames do not go out immediately, EVACUATE AND CALL THE FIRE

DEPARTMENT.

2. NEVER PICK UP A FLAMING PAN — You may be burned.

3. DO NOT USE WATER, including wet dishcloths or towels - violent steam

explosion will result.

4. Use an extinguisher ONLY if:

A. You know you have a Class ABC extinguisher and you already know how

to operate it.

B. The fire is small and contained in the area where it started.

C. The fire department is being called.

D. You can fight the fire with your back to an exit.

* Based on “Kitchen Fire Safety Tips” published by NFPA.

INSTALLER: Leave this manual with the homeowner.

HOMEOWNER: Use and care information on page 5.

16”

16” MIN.

19¼” MAX.

This wood hood kit can be easily installed by following three basic

steps:

• Install a wood mounting frame in hood

• Install the hood kit

• Mount the hood in place on the wall

This wood hood kit requires the previous installation of Broan

Model 103123 Rough-in Kit including:

• 120 VAC electrical wiring

• 3¼” x 10” metal ductwork (extending down to 16” above bottom

of wood hood)

FOR DOMESTIC COOKING ONLY

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - WOOD HOOD KIT

READ AND SAVE THESE INSTRUCTIONSMODEL 103023WOOD HOOD KITCAUTION1. For general ventilating use only. Do not use to exhaust hazardous or explosive

Page 2 - INSTALL LINER

INSTALL MOUNTING FRAMELENGTH OFFRONT & REAR BOARDSTO BE INSIDE WIDTHOF WOOD HOOD LENGTH OF (2) SIDE FRAMING

Page 3 - MOUNT HOOD (continued)

INSTALL LINER (continued)6. Fasten the two, adjustable front liners to hood with eight (8) screws provided. Use a 7/ 64” dia. drill bit to drill thro

Page 4 - WOOD HOODS WIDER THAN 30”

WOOD HOODS WIDER THAN 30”WIRING DIAGRAMDETERMINEFROM WIDTH OF HOODSIDELINERTOPLINERSIDELINER13. Add two (2) metal liners (not supplied) between top a

Page 5 - USE AND CARE

USE AND CARESERVICE5OPERATIONFor best results, always turn on your hood before you begin cooking. Let hood run for a few minutes after you turn off ra

Page 6 - SERVICE PARTS

KEY PART NO. NO. DESCRIPTION 97010327 Complete Blower Assembly (Includes Key Nos. 12, 13, 14, 15, 16, 19 & 20) 1 97009818 Control Box

Page 7

SERVICE PARTSModel 103023 Wood Hood Kit72848171212132348101113

Page 8

99040917Y BROAN-NUTONE ONE YEAR LIMITED WARRANTYBroan-NuTone warrants to the original consumer purchaser of its products that such products will be fr

Comments to this Manuals

No comments

Broan 103023 Instruction Manual

Browse online or download Instruction Manual for Cooker hoods Broan 103023. Broan 103023 Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Cooker hoods Broan 103023