Broan Elite E60000 Series Installation Guide download pdf (Page 12)

This hood requires 50 W max., 120 V with GU10 base, shielded halogen bulbs (not included). (2 required for 30" and 36" hood widths or

3 for 42" and 48" hood widths.)

1. Install bulbs by placing the bulb leads into their grooves in the socket.

2. Gently push upwards and turn clockwise until secure.

To remove bulbs, gently push upwards and turn counterclockwise to disengage bulb leads from their grooves.

NOTE: If need be, use a rubber dishwashing glove to add grip when removing the bulb.

Refer to instructions included with blower.

Plug the 3-prong plug cord from rough-in plate to the 3-prong male connector inside the

hood (A) and the 2-prong male connector cord from rough-in plate to the 2-prong plug

inside the hood (B).

15. INSTALL THE BLOWER (EXTERIOR OR IN-LINE BLOWER)

WARNING

Do not plug the 2 cords together.

HE0078

16. REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS

HD0244

Reinstall grease drip rail. The illustration at right shows how to reinsert the grease drip rail

into the range hood.

CAUTION

Remove protective plastic film covering filters before installing them.

HD0245

NOTE: Assemble the metal handles to the filters,

using provided no. 8-32 x 1/4" screws, before

installing them in the hood.

It is recommended to install side filters first and

finish with center one(s).

1. Inser t one end of the filter into the upper channel

of the hood.

2. Raise the other end toward the inside of hood

and insert in the grease drip rail of the hood.

17. INSTALL LIGHT BULBS

WARNING

Do not touch lamps during or soon after operation. Burns may occur. In

order to prevent the risk of personal injury, only install shielded halogen

lamps. Also, never install a cool beam, a dichroïc lamp, a lamp not suitable

for use in recessed luminaires or identified for use in enclosed fixtures.

HO0090

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Broan Elite E60000 Series Installation Guide Page 12