Broan Exterior Blower 335 Installation Guide

E64000 SERIESINTENDED FOR DOMESTIC COOKING ONLYINSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER.HOMEOWNER: USE AND CARE INFORMATION ON PAGES 13 AND 14.Broa

- 10 -7. HORIZONTAL DISCHARGE INSTALLATION (INTERNAL BLOWER(S) ONLY)HD0271Flip the blower and engage itsflange in the back wall retainingbracket.Using

- 11 -10. INSTALL THE HOOD (ALL BLOWERS)HD0265ABABBINTERNAL BLOWER: Run power cable to installation location. Place the hood in its location. Mark the

- 12 -13. INSTALL LIGHT BULBSThis hood must use 120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base, shielded halogen lamps (not included).WARNIN

- 13 -15. USE AND CAREBaffle FiltersThe baffle filters should be cleaned frequently. Use a warm detergent solution. Wash more often if your cooking s

- 14 -16. OPERATION (CONT’D)HC00351) Halogen light knob2) Blower operation indicator3) ON/OFF blower switch4) Blower speed control knob2314HC0034A) Ha

- 15 -18. WIRING DIAGRAMSBroan Elite E64000 SeriesInternal blower hoodsBroan Elite E64000 SeriesExterior or In-Line blower hoodsLINENEUTRALGROUND120 V

- 16 -19. SERVICE PARTSHL0103HL0104Broan Elite E64000 SeriesInternal blower hoodsBroan Elite E64000 SeriesExterior or In-Line blower hoodsKEY PART DES

WARNING WARNING- 2 -TO REDUCE THE RISK OF FIRE, ELECTRICSHOCK OR INJURY TO PERSONS, OBSERVE THEFOLLOWING:1. Use this unit only in the manner intended

HL0097- 3 -RMP SERIES BACKSPLASH(STAINLESS STEEL WALL COVERINGWITH WARMING SHELVES.OPTIONAL.)8” ROUNDADJUSTABLE ELBOWMODEL 412 TRANSITION(3¼” X 10” TO

- 4 -HL0098RMP SERIES BACKSPLASH(STAINLESS STEEL WALL COVERINGWITH WARMING SHELVES. OPTIONAL)E64000 SERIES HOOD- E64000 SERIES RANGE HOOD SYSTEM -IN-L

- 5 -1. SELECT BLOWER OPTION AND INSTALLATION TYPE1.2 DUCTED INSTALLATIONThe Broan Elite E64000 Series range hood includes many configurations: hood w

- 6 -2. PREPARE THE INSTALLATIONMake sure that the following items are included:- Range hood- Accessories:• Baffle filters• Baffle filters handles

- 7 -2. PREPARE THE INSTALLATION (CONT’D)Cut-out the openings for duct (A) and power cable (B), in cabinet or wall, according to the direction of disc

- 8 -4. REMOVE FILTERS AND GREASE DRIP RAILA. Remove tape on filters.Remove filters from hood and set aside.NOTE: It is recommended to start with the

- 9 -6. CHOOSE THE OPENING(S) (INTERNAL BLOWER HOODS ONLY)Remove the knockout for the chosen opening(s) (horizontal at the back of the hood or vertica