Broan ALLURE QS1 User Manual download pdf

Page 1

ALLURE

QS1 SERIES

RANGE HOOD

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO

PERSONS, OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer. If you

have questions, contact the manufacturer at the address or telephone

number listed in the warranty.

2. Before servicing or cleaning unit, switch power off at service panel

and lock the service disconnecting means to prevent power from be-

ing switched on accidentally. When the service disconnecting means

cannot be locked, securely fasten a prominent warning device, such

as a tag, to the service panel.

3. Installationworkandelectricalwiringmustbedonebyaqualied

person(s) in accordance with all applicable codes and standards,

includingre-ratedconstructioncodesandstandards.

4. Sufcient air is needed for proper combustion and exhausting of

gasesthroughtheue(chimney)offuelburningequipmenttoprevent

backdrafting. Follow the heating equipment manufacturer’s guideline

and safety standards such as those published by the National Fire

Protection Association (NFPA), and the American Society of Heating,

Refrigeration and Air Conditioning Engineers (ASHRAE), and the local

code authorities.

5. When cutting or drilling into wall or ceiling, do not damage electrical

wiring and other hidden utilities.

6. Toreducetheriskofreorelectricshock,donotusethisrangehood

with an additional speed control device.

7. Ducted fans must always be vented to the outdoors.

8. Toreducetheriskofre,useonlymetalductwork.

9. Use with approved cord-connection kit only.

10.This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1. Never leave surface units unattended at high settings. Boilovers cause

smoking and greasy spillovers that may ignite. Heat oils slowly on

low or medium settings.

2. Always turn hood ON when cooking at high heat or when cooking

amingfoods.

3. Clean ventilating fans frequently. Grease should not be allowed to

accumulateonfanorlter.

4. Use proper pan size. Always use cookware appropriate for the size

of the surface element.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF

A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:*

1. SMOTHERFLAMESwithaclose-ttinglid,cookiesheet,ormetal

tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS.

Iftheamesdonotgooutimmediately,EVACUATEANDCALLTHE

FIRE DEPARTMENT.

2. NEVER PICK UP A FLAMING PAN — You may be burned.

3. DO NOT USE WATER, including wet dishcloths or towels - violent

steamexplosionwillresult.

4. UseanextinguisherONLYif:

A. YouknowyouhaveaClassABCextinguisherandyoualready

know how to operate it.

B. Thereissmallandcontainedintheareawhereitstarted.

C. Theredepartmentisbeingcalled.

D. Youcanghttherewithyourbacktoanexit.

* Based on “Kitchen Fire Safety Tips” published by NFPA.

ALLURE

QS1 SERIES

RANGE HOODS

READ AND SAVE THESE INSTRUCTIONS

Installer: Leave this manual with

the homeowner.

Homeowner: Operating and

Cleaning information on page 5.

CAUTION

1. Forgeneralventilatinguseonly.Donotusetoexhausthazardousor

explosivematerialsandvapors.

2. To avoid motor bearing damage and noisy and/or unbalanced impel-

lers, keep drywall spray, construction dust, etc. off power unit.

3. For best capture of cooking impurities, your range hood should be

mounted so that the top of the hood is 24-30” above the cooking

surface.

4. Pleasereadspecicationlabelonproductforfurtherinformationand

requirements.

TABLE OF CONTENTS

Thismanualisdividedintosectionsasfollows:

“PREPARE HOOD LOCATION”

Run ductwork from roof or wall cap, and electrical wiring from ser-

vice panel - to installation location

“PREPARE THE HOOD”

Get your hood ready for installation

“CONNECT WIRING”

Make electrical wiring connections to hood

“INSTALL HOOD”

Securehoodtocabinetandductwork-installbulbsandlters

“OPERATION”

How to use the hood controls

“CLEANING”

Keep your hood in top working condition

“SERVICE PARTS”

 Partnumbersandexplodedviewofhoodcomponents

“WARRANTY”

One-year limited warranty and how to contact us

NOTE IfhoodistobeinstalledNon-Ducted:

  Purchaseasetof(2)non-ductedltersfromyour 

local distributor or retailer and attach them to the

 aluminummeshlters.

PatentNo.:

US D450, 829 S

FOR DOMESTIC COOKING ONLY

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - RANGE HOODS

Page 1ALLURE® QS1 SERIESRANGE HOOD !WARNINGTO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:1. Use this unit

Page 2 - RANGE HOOD

Page 10ALLURE® QS1 SERIESRANGE HOOD BRANCHEZ LES FILS D’ALIMENTATION ÉLECTRIQUE1 Branchez le câble d’alimentation du panneau principal (120 V, coura

Page 3 - PREPARE THE HOOD

Page 11ALLURE® QS1 SERIESRANGE HOOD AVERTISSEMENT : Aﬁn de prévenir les risques d’électrocution, interrompez le courant avant de procéder à l’entret

Page 4 - CONNECT WIRING

Page 12ALLURE® QS1 SERIESRANGE HOOD 628001BPage 12PIÈCES DE REMPLACEMENT NO. NO. DU SCHÉMA DE PIÈCE DESCRIPTION 2 R740013 Raccord du conduit

Page 5 - NON-DUCTED FILTERS

Page 2ALLURE® QS1 SERIESRANGE HOOD CABINETBOTTOMCABINET FRONTHORIZONTAL DUCTACCESS HOLE5¼"5¼"7½"1/8"¾"1315/16" (30"

Page 6 - SERVICE PARTS

Page 3ALLURE® QS1 SERIESRANGE HOOD ➙➙PREPARE THE HOOD3 Remove Wiring Cover from inside the hood. Set cover and mounting screw aside.4 Remove either

Page 7 - DE LA SÉRIE

Page 4ALLURE® QS1 SERIESRANGE HOOD CONNECT WIRINGWARNING: To reduce the risk of electric shock, make sure power is switched off at the service panel.

Page 8 - PRÉPAREZ L’EMPLACEMENT

Page 5ALLURE® QS1 SERIESRANGE HOOD WARNING: To reduce the risk of electric shock, disconnect from power supply before cleaning.Aluminum mesh ﬁlters:

Page 9

Page 6ALLURE® QS1 SERIESRANGE HOOD 628001BWARRANTYSERVICE PARTS KEY NO. PART NO. DESCRIPTION 2 R740013 Damper/Duct Connector (includes hardware

Page 10 - PRÉPAREZ LA HOTTE

Page 7ALLURE® QS1 SERIESRANGE HOOD !AVERTISSEMENTAFIN DE DIMINUER LES RISQUES D’INCENDIE, D’ÉLECTROCUTION OU DE BLESSURES, SUIVEZ CES DIRECTIVES:1.

Page 11 - FILTRES SAN CONDUIT

Page 8ALLURE® QS1 SERIESRANGE HOOD SOFFITE60 CM À 76 CM AU-DESSUS DE LA SURFACEDE CUISSONARMOIRECONDUIT DE 8, 3 CM X 25, 4 CM(Pour évacuation horizon

Page 12 - GARANTIE

Page 9ALLURE® QS1 SERIESRANGE HOOD ➙➙➙➙3 Retirez le couvercle du boîtier de distribution de la hotte. Mettez-le de côté avec les vis d’assemblage.4

Comments to this Manuals

No comments

Broan ALLURE QS1 User Manual

Browse online or download User Manual for Fans Broan ALLURE QS1. Broan ALLURE QS1 Manuel d'utilisation

Summary of Contents

Comments to this Manuals

Related products and manuals for Fans Broan ALLURE QS1