Broan BQLA136SS Use and Care Manual download pdf (Page 10)

INSTALLATION MANUAL

INSTALLATION

Prepare the Hood

1 ] If present, remove all protective polyfilm from the hood and/or parts.

2 ] For BQLA1 Series only: Remove 7” Round Duct Plate from top/back of hood (see

illustration below). Keep the screws for further use. For NQLA1 Series only: Remove the

adapter/damper from back of hood (see illustration below). Keep the screws for further use.

3 ] Using the finger cup, remove the grease filters from the hood by pushing down  and tilting

filters out .

7” ROUND

DUCT PLATE

2 SCREWS

4 ] Using a 11/32” nutdriver or socket, remove the lock nut retaining the flange of the right cover

plate (shaded part on illustration below) to the inner back of hood (see inset). Remove the

right cover plate retaining screws (7 screws), then set the blower cover along with its screws

and nut aside.

BACK OF HOOD

LOCK NUT

2 SCREWS

BQLA1 Series

NQLA1 Series

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Broan BQLA136SS Use and Care Manual Page 10