Broan E64000 Series Installation Guide download pdf (Page 5)

Hood

3¼” x 10” duct

or 7” or 8” round duct

Roof cap

Wall

cap

HH0177A

24” to 30” above

cooking surface

3¼” x 10” to 7” or

3¼” x 10” to 8” transition

(if using round duct)

1. SELECT BLOWER OPTION AND INSTALLATION TYPE

1.1 NON-DUCTED INSTALLATION

For a non-ducted installation, a non-duct kit ANKE60 Series (sold separately) must be installed. For maximum effectiveness, we

recommend installing this kit with a single (internal) blower hood. The kit fits hood from 30-inch width up to 48-inch width. See installation

instructions included with the non-duct kit ANKE60 Series.

1.2 DUCTED INSTALLATION

The Broan Elite E64000 Series range hood includes many configurations: hoods with single or double internal blowers (included with

the hoods), or hoods using external blowers. For hoods using external blowers, the Broan Elite E64000 Series must be installed with

in-line blower models HLB3, HLB6, HLB9 or HLB11, or exterior blower model 331H, 332H, 335 or 336 only. Other blowers cannot be

substituted. (Blowers sold separately).

Plan where and how the ductwork will be installed.

If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1, 2, 3, 4, 10 and up of this manual.

Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. If using 7", 8" or 10" round ducts,

use a transition (internal blower(s) only). Use 2" metal foil duct tape to seal duct joints.

The hood distance above cooktop must not be less than 24". A maximum of 30" above cooktop is highly recommended

for best capture of cooking impurities.

Distances over 30" are at the installer and users discretion.

Hood

10” round duct

Roof cap

Wall

cap

4½” x 18½” to 10”

transition

HH0178A

24” to 30” above

cooking surface

HH0179A

Hood

10” round duct

Exterior blower

24” to 30” above

cooking surface

In-line blower

10” round duct (except

HLB3, 8” round duct)

HH0180A

24” to 30” above

cooking surface

Roof cap

Wall

cap

Hood

SINGLE INTERNAL BLOWER

TYPICAL DUCTWORK

DOUBLE INTERNAL BLOWERS

TYPICAL DUCTWORK

MODEL 331H, 332H, 335 OR 336

EXTERIOR BLOWER TYPICAL DUCTWORK

MODEL HLB3, HLB6, HLB9 OR HLB11

IN-LINE BLOWER TYPICAL DUCTWORK

1 2 3 4 5 6 7 8 9 10 ... 47 48

Comments to this Manuals

No comments

Broan E64000 Series Installation Guide Page 5

Comments to this Manuals