Broan HRV100H User Manual download pdf (Page 20)

3.1 EVERY THREE MONTHS (CONT’D)

5. Clean the condensation tray with a damp

cloth.

6. Check the exterior air intake hood:

• Make sure there are no leaves, twigs, ice or snow that could be drawn into the vent.

• Clean if necessary.

7. Reassemble the components:

• Filters

• Door (The door is secured when you hear a click.)

8. Reconnect the power supply.

VD0101

CAUTION

Even a partial blocking of this air vent could cause the unit to malfunction.

3.2 ANNUAL MAINTENANCE (FALL)

Repeat steps 1 to 6 from the previous Section and continue with the following steps:

1. Clean the recovery core

A- Polypropylene core (heat recovery unit)

• Remove the recovery core.

• Let it soak in a mixture of cold or lukewarm

water and mild soap (dishwashing liquid).

• Rinse thoroughly.

• Shake the core to remove excess water

and let it dry.

B- Enthalpic paper core (heat and humidity recovery

unit).

• Remove the recovery core.

• Remove dust using a vacuum cleaner with a soft brush attachment.

VD0102

CAUTION

Handle the recovery core with care.

CAUTION

This type of recovery module cannot be washed with water.

WARNING

Dangerous voltage may be present. During maintenance and repairs, the

unit must always be turned off, then unplugged. We take great care to

minimize sharp edges; however, please proceed with caution when handling

all components. When cleaning the unit, it is recommended to wear safety

glasses and gloves.

1 2 ... 15 16 17 18 19 20 21 22

No comments

Broan HRV100H User Manual Page 20