Broan EW5836SS Installation Guide download pdf (Page 8)

MODELS EW5830SS • EW5836SS

Page 8

CLEANING & MAINTENANCE

For performance, appearance, and health reasons, clean filter, fan

and grease-laden surfaces. Use only a clean cloth and mild detergent

solution on stainless and painted surfaces.

Clean all-metal filters in the dishwasher using a non-phosphate

detergent. Discoloration of the filter may occur if using phosphate

detergents, or as a result of local water conditions - but this will not

affect filter performance. This discoloration is not covered by the

warranty.

Clean the non-duct recirculating filter surfaces frequently with a damp

cloth and a mild detergent. DO NOT immerse filters in water or put in

dishwasher. Change the non-duct recirculating filters every 6 months.

For replacement non-duct recirculating filters - purchase S99010365

or Model FILTERE56.

The motor is permanently lubricated and never needs oiling. If the

motor bearings make excessive or unusual noise, replace the blower

assembly with an exact service replacement.

LAMP SOCKET

BRACKET

SCREWS

LIGHT

PANEL

LIGHT BULBS

WARNING

Bulbs may be hot. Always allow bulbs to cool down before removing

them.

Use (2) Halogen Bulbs (included with hood) - 120 V, 35 W, shielded

halogen bulbs - MR16 with GU10 base.

NOTE

Suction Cup Tool (included with hood) can be used to install and

remove light bulbs. Align pins on bulb with large diameter opening

on socket, then push bulb in towards hood and rotate clockwise

until firmly seated. The position of the bulb socket (depth) is

adjustable and may require adjustment when: a) certain brands of

bulbs are difficult to install. b) the bulb protrudes too far below the

light panel.

To change the depth of bulb sockets:

- Remove 2 screws on light panel – set screws aside

- Remove Light Panel.

- Loosen 2 Screws holding Lamp Socket Bracket to Light Panel.

- Adjust socket/bracket to desired depth.

- Re-tighten screws securely.

- Re-attach light panel with 2 screws that were previously set aside.

(1)

PUSH IN

(2)

ROTATE

CLOCKWISE

SUCTION

CUP TOOL

HALOGEN

BULB

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Comments to this Manuals

No comments

Broan EW5836SS Installation Guide Page 8

Comments to this Manuals

Related products and manuals for Cooker hoods Broan EW5836SS