Broan QP330SS Operations Instructions download pdf (Page 7)

MODELS QP330BL • QP330SS • QP330WW

QP336BL • QP336SS • QP336WW

QP342BL • QP342SS • QP342WW

Page 7

15 Run House Power Cable between service panel and hood

location. Attach power cable to hood using appropriate clamp.

16 Hang hood from (4) mounting screws driven part-way into

cabinet locations (shown in illustrations under “PREPARE

HOOD LOCATION”). Mounting screws are included in parts

bag. Slide hood back towards wall until mounting screw

heads are engaged in narrow end of keyhole slots in top of

hood. Tighten screws securely. Add 5th mounting screw in

center hole in hood and tighten securely.

17 DUCTED INSTALLATION ONLY:

Connect ductwork to hood and use duct tape to make joints

secure and air-tight. Make sure the damper / duct connector

enters the ductwork and that the damper opens and closes

freely.

HOUSE

POWER CABLE

INSTALL THE HOOD

WARNING

To reduce the risk of electrical shock, switch power off

at service panel. Lock or tag service panel to prevent

power from being switched on accidentally.

ELECTRICAL

WIRING BOX

COVER

14 Remove Electrical Wiring Box Cover from inside

of hood and appropriate Electrical Power Cable

Knockout from top or back of hood.

ELECTRICAL

POWER

CABLE

KNOCKOUT

CONNECT THE WIRING

INSTALL LIGHT BULBS

20 Install (4) Halogen Bulbs (included with hood). Use 120

V, 50 W, shielded halogen bulbs - MR16 with GU10 base.

NOTE: Suction Cup Tool (included with hood) can be

used to install and remove light bulbs.

Align pins on bulb with large diameter opening on socket,

then push bulb in towards hood and rotate clockwise until

firmly seated.

The position of the bulb socket (depth) is adjustable and

may require adjustment when:

a) certain brands of bulbs are difficult to install.

b) the bulb protrudes too far below the light panel.

18 Connect House Power Cable to range hood wiring -

BLACK to BLACK, WHITE to WHITE, and GREEN or

BARE WIRE to Ground Screw. Replace electrical wiring

box cover.

HOUSE

POWER CABLE

GROUND

SCREW

(1)

PUSH IN

CAUTION: Bulbs may be hot. Refer to bulb

packaging for further information.

(2)

ROTATE

CLOCKWISE

SUCTION

CUP TOOL

HALOGEN

BULB

19 Re-attach Bottom Pan with 6 Screws removed in Step 6.

LIGHT PANEL

SCREWS

LIGHT PANEL

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

Broan QP330SS Operations Instructions Page 7

Comments to this Manuals

Related products and manuals for Cooker hoods Broan QP330SS