SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
10D 99041953E
Provides continuous, low-level ventilation, improving
overall indoor air quality.
FEATURES
BLOWER:
• High pressure, centrifugal blowers accommodate many
ducting configurations
• Motors designed for continuous operation
• Permanently-lubricated motors assure worry-free
operation
• Permanent Split Capacitor (PSC) motors are used for
quiet operation and low power consumption
• Plug-in motor rated at 120 VAC, 60 HZ operation
• HVI certified to assure consistent operating performance
HOUSING:
• Rugged 20 gage steel housing finished with electrically-
bonded epoxy paint
• May be installed in virtually any orientation - ceiling, wall
or floor
• In-line installation assures quiet operation
• Easily removable panel permits quick access to blower
for cleaning and servicing without disturbing ductwork
• 6" round inlet and outlet for easy duct connections
• All wiring and ductwork can be connected from the
outside of the housing - no need to remove access panel
or blower.
TYPICAL SPECIFICATION
The in-line ventilator shall be Broan Model SP100 (Broan
Model SP140) (Broan Model SP200).
Ventilator to have steel housing with cover that permits
quick access to blower for cleaning or service without
disturbing ductwork. All wiring to be done from outside of
housing. Unit will accomodate 6" round, insulated flexible
duct.
Blower shall be designed for continuous operation using a
permanently lubricated, PSC (Permanent Split Capacitor)
motor and a centrifugal blower wheel.
Unit to be U.L. listed, CSA certified, and HVI certified.
MODELS SP100, SP140 & SP200
SINGLE-PORT REMOTE
IN-LINE VENTILATORS
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
Comments to this Manuals