Broan QS3 User Manual download pdf (Page 5)

Page 5

ALLURE

QS3 SERIES

RANGE H OOD

KEYHOLE (4)

MOUNTING SCREW (4)

1 Hang hood from (4) Mounting Screws. Slide hood towards

wall until mounting screws are engaged in narrow end of

(4) Keyholes. Tighten mounting screws securely. A long

screwdriver works best.

5 Replace filters, turn on power at service panel, and test for

proper operation.

3 Connect ductwork to hood. Use Duct Tape to make joints

secure and air tight.

DUCT

TAPE

2 Replace bottom cover.

PAR20,

50W MAX.

HALOGEN

BULB (2)

- or -

R16,

40W MAX.

INCANDESCENT

BULB (2)

4 Install (2) PAR20, 50 W Maximum Halogen Bulbs or (2)

R16, 40 W Maximum Incandescent Bulbs. Purchase bulbs

separately.

CAUTION: Bulbs may be hot! Refer to bulb packaging

for further information.

CONNECT WIRING

WARNING: To reduce the risk of electric shock,

make sure power is switched off at the service

panel. Lock or tag service panel to prevent power

from being switched on accidentally.

HOUSE

WIRING

(120 VAC)

CARDBOARD

(Use to protect

cooktop)

1 Connect (120 VAC) to hood. Use a piece of to protect the

cooktop, if necessary.

2 Connect house black to hood black wire, house white to hood

white wire, and house ground under Green Ground Screw.

Securely tighten cable clamp onto house wiring.

GREEN

GROUND

SCREW

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Broan QS3 User Manual Page 5

Comments to this Manuals

Related products and manuals for Cooker hoods Broan QS3