Broan Elite 15SSEXF Service Manual download pdf (Page 18)

Section C – Power Unit Mechanism

Ram Screw Assembly

REMOVE AND REPLACE

The ram screw assemblies transfer power to the ram and

plate. Heavy usage can damage the threaded rod. If it

becomes necessary to replace one or both of the ram

screw assemblies, follow the instructions below.

Remove cabinet cover (see 1. Electrical Components,

Access to Components).

Remove the drive belt (see Drive Belt, Remove and 2.

Re-install).

Remove drive wheels (see Drive Wheels, Remove 3.

and Replace).

RELEASE

TAB

RAM

COMPACTION

PLATE

Remove the compaction plate by releasing the tab 4.

on the front of the ram, and pulling the plate down

and away from the ram. NOTE: When re-installing the

plate, insert the rear tab into the slot at the rear of the

ram, then press up on the front of the plate until it

latches securely in place.

SCREWS

TAB

RAM

SCREW

ASSEMBLY

COMPACTION

PLATE

RAM

Remove the four hex head screws and the ram from 5.

the bottom of the ram screw assembly.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

No comments

Broan Elite 15SSEXF Service Manual Page 18