Broan Elite 15SSEXF Service Manual download pdf (Page 9)

Section B – Cabinet

Slide Rails (Cabinet)

REMOVE AND RE-INSTALL

The compactor’s slide rails may become bent from mis-

use or the ball bearings may become worn.

RAIL

SPRING CLIPS

SCREW

NUT

SCREWS

Remove trash bucket assembly. (See Trash Bucket, 1.

Remove.)

Remove two Phillips head screws from the front and 2.

rear of the left track slide rail. NOTE: It is necessary to

slide the inner rail to access both screws.

Remove the slide rail from the cabinet.3.

To re-install, place slide rail onto the three “spring 4.

clips” inside of the cabinet. Align holes in rail with

bracketed holes on inside of cabinet and secure with

two Phillips head screws. Repeat for other side.

Slide Rails (Bucket)

REMOVE AND RE-INSTALL

RAIL

BUCKET

SCREW

SCREWS

Remove four Phillips head screws that secure the left 1.

slide rail to the bucket. Remove the rail.

Repeat Step 1 for the right slide rail. 2.

Installation is the reverse of removal.3.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

No comments

Broan Elite 15SSEXF Service Manual Page 9