Models: 1001 ERV, 1001 HRV, 2001 ERV,
2001 HRV, ERV100HC, ERV200HC
NOTES
1- Controls available. See Section 7 (Low voltage only,
12VDC).
2- The factory set wiring for blower speed selection is
high and low. Medium speed can be selected instead
of low speed. Disconnect the RED wire from the motor
RED tap and connect it to the motor BLUE tap.
3- If any of the original wire, as supplied, must be
replaced, use the same or equivalent wire.
4- Use the factory supplied protective tubing.
5- The field wiring must comply with applicable codes,
ordinances and regulations.
6- The furnace fan circuit must be class 2 circuit only.
7- SPECIFIED UL LISTED/CSA CERTIFIED LINE FUSE.
LittelFuse (225 003), 2AG Fast-Acting Fuse, 224/225
Series. Rating: 3 A
LINE VOLTAGE
LOW VOLTAGE
AND FIELD WIRE
Connection
Logic
WARNING
JUMPERS
TABLE
MODELS
TYPES
DEFROST TIME
DEFROST/VENTILATION
MINUTES
JU1A JU1B
JU1C
JU1D
JU1E JU1F
JU1G
23°F
-5°C
5°F
-15°C
-17°F
-27°C
OUT OUT
OUT
OUT
OUT IN
OUT
ALL
MODELS
6/32 6/32 6/20
NO
CHANGE
NO
CHANGE
NO
CHANGE
NO
CHANGE
NO
CHANGE
OUT
NO
CHANGE
ALL
MODELS
10/30 10/20 10/15
JU1
• • • •
•
• •
• • • • • • •
A
B C D E F G
2
1
FUNCTION TABLE RELAY
MODE K1 K2 K4 K5
Intermittent
0 0
0 0
Exchange Low 1 0 1 1
Exchange High
1 1
1 1
Circulation Low
1 0
1
0
Circulation High 1
1
1 0
Defrost Cycle
1
1
1 0
OFF 0
0
0 0
0 = Relay coil is de-energized
1 = Relay coil is energized
Risk of electric shocks. Before performing any maintenance or servicing, always disconnect the unit from its power
source. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation.
If the fuse blows, unplug the product from the outlet. Replace the fuse as per the servicing instructions (follow
product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be
present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
Comments to this Manuals