Broan HRV100H Service Manual download pdf (Page 26)

20/40/60-MINUTE PUSH-BUTTON TIMER:

(Not available for HRV100H and HRV200H

models.)

Activate the push-button. Within 2 seconds,

push one time for 20 minutes, two times for

40 minutes or three times for a 60-minute

activation.

Results expected:

1. Motor speed: High for 20, 40 or 60 minutes.

2. Indicator light goes “ON” and flashes

every 5 seconds (one time to indicate a

20-minute operation, two times for a

40-minute, and three times for a 60-minute operation).

3. Air exchange indicator light goes “ON” (VT2W control only).

NOTE: To stop activation, push one more time.

10.2 OPTIONAL CONTROLS

First, turn OFF the main control device VT1W, VT2W, Deco-Touch, Platinum or 3-Position Switch before checking the remote optional

control(s).

VC0046

20 min.

40 min.

60 min.

60-MINUTE CRANK TIMER:

Activate the timer.

Results expected:

1. Motor speed: High for either 20, 40 or 60 minutes.

2. Air exchange indicator light goes “ON” (VT2W control only).

High speed activation time Position of dial

20 minutes 1 to 19

40 minutes 20 to 39

60 minutes 40 to 60

OFF

Turn

Past

VC0017

MINUTES

HOLD

20-MINUTE PUSH-BUTTON:

(Available only for HRV100H and HRV200H

models.)

Activate the push-button.

Results expected:

1. Motor speed: High for 20 minutes.

2. Indicator light goes “ON”.

3. Air exchange indicator light goes “ON”

(VT2W control only).

VC0030

11. Maintenance / Instructions for User

WARNING

Risk of electric shocks. Before performing any maintenance or servicing, always disconnect the unit from its

power source.

• Review with the user the steps required for the regular maintenance of her/his ventilation system. These steps are described in details

in the user manual:

FOUR TIMES A YEAR:

• Inspect the intake hood, and clean if needed.

• Clean the filters.

• Clean the interior of the cabinet and clean the door.

• Clean the condensation tray and inspect the drain tubing (if need be).

ONCE A YEAR:

• Clean the recovery core.

• Clean the blades of the blower wheels if needed.

• Warn the user of the necessity to rebalance the system following a major house renovation or following the installation of any extra

registers.

• Make sure the user understands how to use the main control as described in the user manual.

CAUTION

Do not oil the motor. It is already permanently lubricated.

10. Overall Verification (cont’d)

1 2 ... 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Broan HRV100H Service Manual Page 26

Comments to this Manuals