Broan 61000 Series User Manual download pdf (Page 5)

- 5 -

CONNECT DUCTWORK

Ductfree Configuration

1. Use screws and wall anchors (sup-

plied) to secure the upper bracket

to wall and ceiling as shown.

2. Turn upper flue section upside

down so air vents are at the top.

Slide upper flue section into lower

flue section.

3. Snap the plastic duct collar into the

hole in the bottom of the ducfree ple-

num. Connect the ductfree plenum

to the upper flue section with (4) flat-

head screws (supplied).

4. Measure the distance from the top

of the discharge collar to the ceil-

ing. Cut a length of 6" round steel

duct 6" shorter than this dimension.

5. Fit duct section over the plastic duct

collar. For best fit, make sure duct

seam is toward the front.

6. Set duct/flue assembly on hood with top tilted away from wall. Reach around flue

to engage bottom of duct with discharge collar on hood. Tilt flue up against wall.

Upper flue section can be cut to length if necessary.

7. Raise upper flue section and screw it to upper bracket with (2) screws (supplied).

Screw lower flue section to hood with screws (supplied).

MEASURE

UPPER

FLUE SECTION

DUCTFREE

PLENUM

PLASTIC

DUCT COLLAR

AIR

VENTS

(in upper flue section)

UPPER

BRACKET

LOWER

FLUE SECTION

6" ROUND

STEEL DUCT

DISCHARGE

COLLAR

DUCT

SEAM

DUCTFREE FILTER

INSTALLATION

1. Purchase a ductfree filter kit (part no.

????) from your dealer.

2. Screw the plastic mounting brackets to

the blower inlet.

3. Position the filters over the mounting

brackets. Rotate mounting brackets to

lock filters in place.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Broan 61000 Series User Manual Page 5

Comments to this Manuals

Related products and manuals for Cooker hoods Broan 61000 Series